-
Level Symbol - GA drawing - Plan View
Hello,Could you please explain how can I get level symbol for beams shown on plan view?For section view that is clear.Kind Regards -
Adding new sections to Clip Angle and Double Side Clip Angle connections
Hi,Could you please give me advice how to do following.I want to add new sections to Clip Angle and Double Side Clip Angle connections. Beside regular angles, I want to have cold rolled cleats from Albion, Ayrshire, Ultra...Kind RegardsMilos -
Axes intersection
Intersection point between axes is not shown if one or both axes are created as single X or Y axis.
Attachment: axes intersection.zip
-
Gridline bubbles and custom scale
If we have column reinforcement drawing with elevation view and section and everything is adjusted to scale 1:50. Let’s say that we want section to be in scale 1:25. So if we apply scale 1:25 to section everything is scaled OK. But if we need to update drawing only gridline bubbles on scaled drawing is scaled back to its original size.
Attachment: view scale.zip
-
Reinforcement solution for columns
We are experiencing strange behavior of reinforcement solution for columns. It seems that there is some strange rule for orientation/rotation of solution within a column.
For example we have made 1 column and copied it two times, and then edited one of dimensions of columns. So we have 3 columns with dimensions 30x25cm, 40x25cm and 60x25cm (only difference between them is name and one of dimensions). Then we applied standard solution “Column 2 stirrups – asymmetric” to first column with all default values. Then with “Copy Dynamic Reinforcement” we applied same solution to other 2 columns. And in the end we have made reinforcement drawing with front elevation and top section and all of columns have different orientation/rotation of solution.
Notes:
-neither of columns is rotated
-behavior is same for all solutions for columns
Attachment: advance columns_0.zip
-
Associative/intersection dimension grip point
attachmentAttachment: model_4.zip
-
Associative/intersection dimension grip point
attachmentAttachment: slika1_0.png
-
Associative/intersection dimension grip point
it seems i can not attach more files at once...Attachment: slika2_0.png
-
Associative/intersection dimension grip point
Grip point for selected associative and intersection dimensions started to act strange. Grip point used to be beside dimension line and it used to change baseline spacing for those dimensions, and suddenly it started to appear in centroid of some grey imaginary rectangle and it moves dimensions in all directions, even moves cut line for intersection dimension. It is unusable.
I created simple model for you, just two columns. All default values. Then I created bottom view and associative dimension for those two columns. See attached pictures please.Attachment: slika3.png
-
Symbol position updated with drawing update
Thank you very much Michael