-
Hallo...<br/>Wie kann ich die Detailzeichnungen als DWG versenden<br/>so das diese auch mit einem normalen Autocad gelesen werden können ?<br/><br/>MfG<br/>Klaus Caspers
Hallo Herr Caspers,
damit Sie DWG's aus Advance Steel so versenden könnne, damit sie mit reinem AutoCAD auch gelesen werden können, müssen Sie in Ihrem Modell in den Dokumentenmanager gehen, dort die zu versendenden Zeichnungen auswählen und dann auf den Button "Zum Auflösen hinzufügen" klicken. Bestätigen Sie das Ganze mit einem Klick auf OK. Der Dokumentenmanager schließt sich dann und Sie werden dann noch in einem weiteren Fenster gefragt, ob Sie Zeichnungen auflösen wollen. Dies bestätigen Sie dann wieder. Es werden dann alle gewählten Zeichnungen kopiert und in reine AutoCAD-Elemente aufgelöst. Die aufgelösten Zeichnungen finden Sie dann im Ordner Detail exploded. Dieser befindet sich in dem Ordner, der den gleichen Namen hat, wie das Modell am selben Ort.
MfG
Elias Theuring -
Sehr geehrte Damen und Herren,<br/>nun habe ich die Lizenz für Advance CAD von Graitec <br/>erhalten, jedoch fehlt mir eine Lizenz für Autocar Advance <br/>Steel.<br/>Ich hatte anscheinend übersehen auf das Mail von Autodesk <br/>zu antworten, habe aber
Hallo Herr Gabriel,
wenn Sie das Online-Formular OptIn-Prozess ausgefüllt und abgeschickt haben, sollten Sie die Lizenz für Autodesk Advance Steel 2015 noch erhalten.
Ich denke, Sie sollten sich einfach noch etwas gedulden.
MfG
Elias Theuring
-
Probleme mit den Anwenderprofilen unter AS2014.<br/><br/>Ich habe die Anwenderprofile über Datenbanken mischen, aus AS2013, eingelesen. Sie sind auch in der Datenbank vorhanden (im GAM unter Tabelleneditor sichtbar). Wenn ich nun das Profil unter
Telefonisch geklärt
-
Wie kann ich ein Modell, was unter AS2014 erstelltworden ist, unter AS2013 öffnen?<br/><br/>Dieter Stromberg
Hallo Herr Stromberg,
leider ist Advance Steel nicht abwärts kompatibel und so lassen Sie Modelle aus AS2014 nicht in AS2103 abspeichern. Sie haben allerdings die Möglichkeit über die Graitec BIM Schnittestelle, Modelle aus AS2014 als *.gtcx abzuspeichern und in AS2013 in ein neues Modell zu importieren.
MfG
Elias Theuring
-
Schraubengarnitur ändern
Hallo Herr Schwarzl,
im Graitec Advance Manager können Sie im Schraubeneditor die Garnitur entsprechend verändern. Ein entsprechendes FAQ finden Sie im Graitec Advantage.
MfG
Elias Theuring
-
Ich arbeite mit der Version 2014 Standalone.<br/>Es werden nnur vollfarbige Zeichnungen ausgedruckt.<br/>Wo kann man das umstellen ? In den Druckereigenschaften funktioniert es nicht. Auch mit Monochrone funktioniert es nicht.
telefonisch geklärt
-
Erstellen einer XML Datei vom Modell
telefonisch geklärt
-
Hallo,<br/>seit kurzem startet das Programm Advance Concrete wenn ich eine Zeichnung öffne, obwohl ich gar j´keine Lizens dafür habe und folglich auch nicht damit arbeite oder es vorher mal geöffnet hätte.<br/>Wie kann ich es verhindern das das Programm
Hallo Herr Stromberg,
dann deinstallieren Sie Advance Concrete einfach.
MfG
Elias Theuring
-
guten tag!<br/>ich muß für die Montage der kranfirma das gewicht meiner Konstruktion schicken. welches ist das tatsächliche gewicht? gewicht nach schwerpunktsberechnung bzw. zusammenbaugewicht variieren, wobei beim zusammenbaugwicht sowieso 2 angaben
Hallo Herr Daninger,
das tatsächliche (exakte) Gewicht ist das Ergebnis der Schwerpunktsberechnung. Beim Zusammenbaugewicht wird auf eine Einstellung in den Voreinstellungen zurückgegriffen, die bestimmt, welches Abrechnungsgewicht verwendet werden soll. Dabei werden z.B. Bohrungen, Konturen oder Schrägschnitte nicht berücksichtigt, welche bei der Fertigung als Abfall gelten, aber trotzdem abgerechnet werden sollen. Außerdem sind hier zwei Angaben, die eine ohne Verbindungsmittel und die andere mit Verbindungsmittel.
MfG
Elias Theuring
-
Habe 2 Fragen zu den Acad-Funktionen.<br/><br/>1. Menü Grundfunktionen/Schraffur funktioniert nicht ?!<br/>2. Wie kann ich, wenn ich in einem Befehl bin, zusätzliche Fangpunkte auswählen ?
Hallo Herr Cicholski,
zu 1. Ich nehme an, Sie machen das Ganze unter Advance CADWas wollen Sie denn schraffieren? Etwa Teile eine Advance Details? Das geht nicht, weil diese Detail manchmal nicht geschlossen sind. Normale geschlossene geometrische Formen wie Rechtecke, Quadrate oder Polygone lassen sich schraffieren.
zu 2. Das kammt ganz darauf an, ob Sie mit AutoCAD oder Advance CAD arbeiten.
In Advance CAD ist es so, wie es Herr Eiche geschrieben hat: Rechte Maustaste + Shift (Umschalt)
In AutoCAD gehen beide (bzw. drei) Versionen: Rechte Maustaste + Strg oder Rechte Maustaste + Shift (Umschalt) oder auch die Kombination aus allen dreien
Die sicherste Methode ist sicher die, die bei beiden CAD Platformen funktioniert, also Rechte Maustaste + Shift (Umschalt)
MfG
Elias Theuring