-
RE: Power Pack Stairs - Cover @ Landing
Sorry I don't see anything in you screenshot. I don't know why I would want a gap at the stair treads. I put a 1/4 gap at the landing so the there are no fit issues after stairs are bolted together. I can put a gap using the standard stair macro. I was just hoping there is a way to do that with Power Pack macro. I guess I can always add it after the stair are made. I have attached a screenshot of what I am looking to do. -
Power Pack Stairs - Cover @ Landing
In the Power Pack Stair macro. When making the Landing cover flush or below the top of the stringer. Is there a way to put a gap between the stringer and bar grating(landing cover)? We normally make our bar grating(landing cover) a 1/4" from touching the stringer. -
RE: Custom tread profile with power pack
I have added custom stair treads to the special part treads in the power pack stair macro. Is that what you mean?
-
RE: Stair Tread bolts & Landing profile depth (2020 Graitec Power Pack Stairs and Rails)
I contacted the support and they told me the bolt problem use fixed with 2020.1 version and the stringer offset is fixed in the 2022 version. I will not be using the stair part until we update to 2022 version of Advance Steel. I wish they would have fixed the offset problem with the 2020.1 version because I am not sure when we will move to a newer version of Advance Steel. Thanks for trying to help Mick Allitt! -
RE: Stair Tread bolts & Landing profile depth (2020 Graitec Power Pack Stairs and Rails)
Does anyone use Power Pack to make stairs? If so, How do you get around the problems I am having? -
Stair Tread bolts & Landing profile depth (2020 Graitec Power Pack Stairs and Rails)
I am trying to make stairs with an landing. I am having to 2 problems with the macro. I am trying to make a bar grating stair tread with side plates that are bolted to the stringer. The only problem I am having is I can't change the bolt type. Every time I choose a different bolt type it changes back to "EN ISO 10642 bolts". The other problem I am having is that I can't control the landing stringer top depth when I use a section profile vs. a plate for the stringer. I am using Advance Steel 2020. I have attached pictures of the problems I am having.